Why Should Aerialists Lift? The Strength Exercises That Carry Into Your Skills

The internet loves a creative strength drill.

Hanging core circuits. Elaborate conditioning flows. Exercises that look as impressive as the skills they are meant to support.

Some of them are useful. But they are the seasoning, not the meal. The meal is foundations, and knowing which foundation exercise feeds which skill.

So when a client asks me, "Why should I do bench presses? Why should I do squats? Why should I do the deadlift for aerial?", it is a brilliant question. This post is the answer.

Foundations make you strong. Aerial drills turn that strength into skills

Every mixed class I teach, I offer two versions of the same move. A beginner one, and an intermediate one. And every mixed class, I watch someone skip the version built for where they are and go straight for the harder one.

Not because they are reckless. Because social media only ever shows the highlight reel.

Strength training works the same way. Aerial-specific drills are essential, but they work best on top of a strength base built from simple, fundamental movement patterns:

  • Push

  • Pull

  • Squat

  • Hinge

  • Carry

On top of those, I add the work most gym programmes leave out: rotation, side bending and single-sided training. More on that below.

Build those, and your aerial drills have something to work with. Skip them, and you are asking the drills to do two jobs at once.

Lift by lift: what each one does for your aerial

The exact carryover depends on your skills and your body. But here is the general picture.

The squat

The squat builds leg and hip strength through a big range of motion. For aerialists, that means a more stable base for standing positions on the hoop, more control in your dismounts and landings, and knees and hips that cope better with the demands of repeated training.

It also trains your trunk to stay stable under load, which shows up everywhere on the apparatus.

The bench press

Aerial is overwhelmingly a pulling sport. Your back, biceps and grip get worked in almost every session. Your pushing muscles often do not.

The bench press builds strength through your chest, shoulders and triceps. That supports skills where you press away from the hoop or support your weight on straight arms, and it helps balance out all the pulling, which matters for shoulder health over the long term.

The deadlift

The deadlift trains the hinge: your hamstrings, glutes and back working together to lift a load from the floor.

For aerialists, that means a stronger posterior chain for hip-driven movement such as beats, better grip, and a trunk and lower back that can handle load with control. It is also one of the most efficient ways to build whole-body strength in a single exercise.

The pull

Rows, chin ups, pull ups and their progressions. This one is obvious, but it is worth doing well.

Pulling strength in the gym supports your climbs, your pullovers and your hanging control. Training it with controlled reps, including the lowering phase, builds the shoulder and scapular control that keeps those skills safe.

The carry

Carries are simple. Pick up something heavy and walk.

They build grip endurance, trunk stability and shoulder stability all at once. If your grip gives up before the rest of you on the hoop, carries are one of the most direct ways to change that.

Beyond the big lifts: rotation, side bending and single-sided work

The big lifts have one limitation. Most gym exercises are one-dimensional.

They move you forwards and backwards, in the sagittal plane, or side to side, in the frontal plane. Few of them train the third plane, the transverse plane, where you twist and rotate.

Aerial does not work in straight lines. On the hoop you twist, spin, side bend, reach across your body and hold shapes that load one side more than the other. If your training only ever moves in one or two planes, those are the positions you are least prepared for.

That is why I always integrate twisting and side bending into my programmes.

Rotation and side bending

This work does not need a session of its own. It fits best as accessories, or as a core finisher at the end of a strength session. Some of it can be sneaked into a warm-up or between sets, so it adds almost no time.

Examples include:

  • Rotational work, such as cable or band woodchops and controlled rotations

  • Anti-rotation work, where you resist the twist, such as a Pallof press

  • Side bending and lateral trunk work, such as side planks and their progressions

Train both sides of it: the ability to create rotation and the ability to resist it. On the hoop, you need both.

Unilateral work to rebalance the body

Most aerialists have a favourite side. You mount, invert and spin more often one way, and over the years that adds up to differences in strength, mobility and control between your left and right.

Unilateral work, training one arm or one leg at a time, helps rebalance that. It shows you which side is lagging and gives it the chance to catch up. It also challenges your balance and trunk stability in a way two-sided lifts cannot.

Examples include single-arm rows and presses, split squats and step ups, single-leg hinges, and one-sided carries, holding a weight in one hand only.

Start each set on your weaker side, then match the reps on your stronger side.

Why strength training matters more as we get older

Strength training is not only about skills. For aerialists in their 30s, 40s and beyond, it is one of the best investments you can make in your long-term training.

A large overview of the research, updating the American College of Sports Medicine position on resistance training, found that resistance training improves strength, muscle size, power, balance and physical function in healthy adults (Currier et al., 2026).

There is also good evidence for bone health. In the LIFTMOR trial, postmenopausal women with low bone mass who did two supervised 30-minute sessions a week of high-intensity resistance and impact training for eight months improved their bone density and physical function compared with a low-intensity home programme (Watson et al., 2018). That was a supervised programme in a specific group, but it shows what consistent, well-coached strength work can do. Thirty minutes, twice a week.

How I programme strength for aerialists

My method is simple on purpose.

Compound lifts first

Big, multi-joint lifts like the squat, deadlift, bench press and rows form the core of the session. They give you the most strength for your time. The latest ACSM evidence review found that strength improved most with heavier loads, a full range of motion, two to three sets, training the key lifts early in the session and at least two sessions a week (Currier et al., 2026).

Accessories in supersets

Smaller exercises go in pairs, back to back, to keep sessions short. This is usually where the unilateral, rotation and side bending work sits. That is how a strength session stays around 30 minutes instead of an hour.

Keep it simple at first

Once the exercises are simple enough and achievable enough, they are easier to repeat. You walk in, you walk out. No decisions, no guessing.

The same exercises for 4 to 8 weeks

This is where most people go wrong. They change their programme every week because variety feels like progress.

It is not. Repeating the same exercises for 4 to 8 weeks, and gradually making them harder, is how strength builds. That is progressive overload. The same ACSM review found that complexity, equipment type and periodisation did not consistently change outcomes (Currier et al., 2026). Short, simple and repeatable is what sticks.

Progressive overload in plain language

Progressive overload means asking a little more of your body over time. More weight, more reps, more control, or more sets.

It does not mean adding weight every session. It means a steady, deliberate trend upwards.

One of my clients started with eccentric chin ups, lowering slowly from the top. At first, the third rep was a fight. A few weeks later, five reps felt easy. That is progressive overload. Not dramatic, but real, and it is the kind of milestone worth tracking.

What to do when the next weight is too heavy

This is one of the most common questions I get, and it is a good one.

Weight jumps in the gym are not always small. On upper body exercises especially, going up by even the smallest plate can feel instantly much harder. That is normal.

When the next weight is too heavy:

  • Stay at your current weight and add reps first

  • When you can do two more reps than your target with good form, try the heavier weight for fewer reps

  • Build those reps back up at the new weight

  • Use microplates or a smaller dumbbell jump if your gym has them

Progress does not have to come from the number on the weight.

Beginner and advanced foundations

Every level has its own foundations.

A beginner might squat to a box, row with a band and carry a pair of light kettlebells. An advanced aerialist might back squat, do weighted chin ups and heavy farmer's carries. The patterns are the same. The load and complexity change.

That is why a programme should be built for your level, not copied from someone else's.

Practical ways to get started this week

  • Pick one exercise for each pattern: push, pull, squat, hinge, carry

  • Add one unilateral exercise as an accessory, and one rotation or side bending exercise as a core finisher

  • Choose a weight or variation you can do with good form for 8 to 12 reps

  • Train them twice a week, around 30 minutes per session

  • Keep the same exercises for at least four weeks

  • Write down what you lift, so you can see the progress

And keep your mobility sessions in. They are the first thing people skip, and they are part of the programme, not an extra.

If you are new to strength training and want a structured place to start, the Aerialist's Starter Toolkit is a six-week programme that builds exactly these foundations. Find out more about the Starter Toolkit If your goal is the straight arm invert, SAIL combines strength work with group coaching on the skill itself. Find out more about SAIL

Frequently asked questions

How often should aerialists strength train?

Two sessions a week is a good starting point. The research supports at least two sessions a week for strength, and two short, focused sessions fit around most aerial training schedules.

Do I need a gym?

A gym makes heavier loading easier, but you can build foundations with dumbbells, kettlebells or resistance bands at home, especially when you are starting out.

Strength is the foundation, not the extra

Creative drills are the seasoning. Foundations are the meal.

Squat, push, hinge, pull and carry. Add rotation, side bending and single-sided work. Keep it simple, repeat it, make it a little harder over time. Your aerial will feel the difference.

And if you want a strength programme built around your level and your aerial goals, the Aerial Performance Lab is where we do that together. Find out more about the Aerial Performance Lab

References

Currier, B. S., D'Souza, A. C., Fiatarone Singh, M. A., et al. (2026) 'American College of Sports Medicine Position Stand. Resistance training prescription for muscle function, hypertrophy, and physical performance in healthy adults: An overview of reviews', Medicine and Science in Sports and Exercise, 58(4), pp. 851-872. https://doi.org/10.1249/MSS.0000000000003897

Watson, S. L., Weeks, B. K., Weis, L. J., Harding, A. T., Horan, S. A. and Beck, B. R. (2018) 'High-intensity resistance and impact training improves bone mineral density and physical function in postmenopausal women with osteopenia and osteoporosis: The LIFTMOR randomized controlled trial', Journal of Bone and Mineral Research, 33(2), pp. 211-220. https://doi.org/10.1002/jbmr.3284

Next
Next

Your Winter Aerial Training Should Not Look Like Your Summer Training